Ekin - 55V-2S
Double Station Sliding Table Vertical Injection MachineMachine Specifications
Clamping Force:
550 kN
Injection Weight (PS):
90 gr (PS)
Screw Diameter (mm):
30
V-25 serie is a dual-station vertical injection and molding plate is moving left and right. This model is more preferred in the production of inserts of large volume and dimensions. In addition, thanks to the dual stations, while the injection process goes on, the parts are placed in the other side and this increases the number of production.
| INJECTION UNIT | ||||
| MACHINE MODEL | Birim | A | B | C |
| Screw Diameter | mm | 25 | 30 | 35 |
| Screw L/D Ratio | L/D | 23,6 | 20 | 18 |
| Shot Size | cm³ | 68 | 99 | 134 |
| Injectıon Weight (ps) | g | 63 | 91 | 123 |
| Injectıon Rate | g/s | 49 | 62 | 74 |
| Plasticizing Capacity | g/s | 7 | 10 | 15 |
| Injectıon Pressure | MPa | 230 | 180 | 140 |
| Screw Speed | rpm | 0-220 | ||
| Screw Stroke | mm | 140 | ||
| CLAMPING UNIT | ||||
| MACHINE MODEL | Birim | Değer | ||
| Clamping Force | KN | 550 | ||
| Clamping Stroke | mm | 200 | ||
| Min. Mold High | mm | 150 (250) | ||
| Maxımum Openıng | mm | 350 (450) | ||
| Max Mold Dimensions | mm | 450 x 250 | ||
| Ejector Stroke | mm | 70 | ||
| Ejector Force | KN | 43 | ||
| HYDRAULIC ELECTRIC SYSTEM | ||||
| MACHINE MODEL | Birim | Değer | ||
| Max. Pump Pressure | Mpa | 14 | ||
| Pump Motor Power | Kw | 11 | ||
| Heater Power | Kw | 4,2 | ||
| Oil Tank Capacity | l | 350 | ||
| GENERAL DETAILS | ||||
| MACHINE MODEL | Birim | Değer | ||
| Slide Table Stroke | mm | 460 | ||
| Rotary Table Diameter | mm | - | ||
| Machine Dimensions (LxWxH) | m | 2,1 x 1,9 x 3,1 | ||
| Machine Weight | t | 3,5 |
